StiffClip® RT Roof Tie Light Gauge Steel Roof Framing Members

Code: StiffClip-RT
$1.24
StiffClip® RT Roof Tie Light Gauge Steel Roof Framing Members
Processing...

StiffClip® RT Roof Tie Light Gauge Steel Roof Framing Members

Code: StiffClip-RT
$1.24

Downloads:
PDF Download Tech Sheet | DWG Download DWG | BIM Download BIM |
Product Details
StiffClip® RT series secures and ties down roof framing members. StiffClip’s unique shape incorporates stiffened legs to increase compressive strength and resist horizontal, lateral, and uplift loads. The allowable design load table shown is based on the use of StiffClip as it is attached to various steel stud material thicknesses and yield strengths. Design loads consider loads on the clip and the use of #12 screw fasteners relative to the framing material

StiffClip RT650 is 6½" long, and may be used when wall studs do not align with roof framing member

The RT1300 is 13" long, and is used when wall studs align with roof framing member. Clips are designated by length, followed by thickness and number of screws used in each leg (determined by load requirements - refer to load tables)
Example: Stud aligns with roof framing member (see application image) Designate: StiffClip® 1300



* StiffClip RT650 are packaged in pairs * StiffClip RT1300 is packaged as one unit

StiffClip® RT Features and Value:

• Stiffened ribs for added strength
• Guide holes for attachment to framing members (0.188” dia.)
• Engineered for steel members
• Structurally load tested
• Meets all building code criteria

Material Composition
33 mil & 43mil thicknesses: ASTM A1003/A1003M Structural Grade 50 (340) Type H, ST50H (ST340H): 50ksi (340MPa) minimum yield strength, 65ksi (450MPa) minimum tensile strength, with ASTM A653/A653M G60 (Z180) hot dipped galvanized coating

54 mil thickness: ASTM A1003/A1003M Structural Grade 50 (340) Type H, ST50H (ST340H): 50ksi (340MPa) minimum yield strength, 65ksi (450MPa) minimum tensile strength, with ASTM A653/A653M G90 (Z275) hot dipped galvanized coating