StiffClip® LS Multi-Purpose Light Steel Framing Connector

Code: StiffClip-LS
$2.18
StiffClip® LS Multi-Purpose Light Steel Framing Connector
Processing...

StiffClip® LS Multi-Purpose Light Steel Framing Connector

Code: StiffClip-LS
$2.18

Downloads:
PDF Download Tech Sheet | DWG Download DWG | BIM Download BIM |
Product Details
The StiffClip® LS series is to be utilized when connecting framing members in various applications, the most common being connecting spandrel wall studs to structure. StiffClip LS resists axial tension and compression loads. Allowable design loads may be calculated based on the Section Properties shown below. Long lengths greater than 20” incorporate a stiffening lip to increase compressive strength.

StiffClip LS is available in various lengths. To calculate length for spandrel wall connectors, add stud depth, 3” for attachment to steel (5.5” for attachment to concrete), and the distance of construction tolerance. For other applications, simply designate length (in.) multiplied by 100
Example: 6” stud, 4” attachment to structure, 2” tolerance (6+4+2=12) Designate: StiffClip® LS1200

StiffClip® LS Features and Value:

• •Various lengths allow flexibility
• •Eliminates shims and scabs to accommodate stud tolerance from structure in spandrel walls
• •Manufactured from mill certified steel

Material Composition
ASTM A1003/A1003M Structural Grade 50 (340) Type H, ST50H (ST340H): 50ksi (340MPa) minimum yield strength, 65ksi (450MPa) minimum tensile strength, 68mil minimum thickness (14 gauge, 0.0713” design thickness) with ASTM A653/A653M G90 (Z275) hot dipped galvanized coating.

The attachment of StiffClip to the primary structure may be made with PAFs, screw/bolt anchors or weld and is dependent upon the base material (steel or concrete) and the design configuration.
Material Composition
Installation
Order Information
Catalogs